Ai Naite has strictly checked every batch of raw materials purchased by the company. All suppliers are required to provide a warranty certificate and a true and complete test report of the product. At the same time, samples are taken to test the raw materials, and all the unqualified raw materials are returned. No need to. Carefully inspect the molds used in the production to ensure that the FRP panels are accurate in size.
The lower and upper membranes were first laid on a 68-meter-long production line and run at a constant speed of 6 m/min through a tractor at the end of the line. Pour the resin from the iron drum into the drum, quantitatively extract it into the mixing container by the pump, and then add various additives (color paste, etc.) according to the amount of the resin. After mixing evenly, pump it to the production line through the metering pump. On the running film (control the thickness of the lighting board according to customer needs, generally 1.0, 1.2, 1.5, 2.0mm). The bottom film was used as a carrier film by a wire laying machine, pulled by a tractor at the end of the production line, and operated at a speed of 6 m/min. At the production end, a certain proportion of resin and various additives are extracted by the metering pump through the storage tank, and after the vacuum mixing of the mixing tank is evenly mixed, the prepared material is input to the production end of the production line through a special device, and after controlling the resin thickness, The perfect vacuum pumping system will be passed through the wire thrower.